1Place two magnetic lines while using the ceramic bricks as SmCo Magnet part of your shoe box 2 inches apart, with duct tape backing. Ensure the magnets they fit north side up, and that is the inside that attracts metal. The lines needs to be parallel.2Cut cardboard into pieces about 3 1/2 inches by 4 inches to create a small train car. You might want to adjust the dimensions according to the measurements your shoe box.3Test the brick magnets to ensure which argument repels the magnet track. You can be taping lack of onto the foot of the train car. Within the train, north of manchester side in the magnet should be facing out.4Tape down the magnets to your train car 2 inches apart for them to lineup using the track exactly. Hold your train car in the track; it will levitate above it. However, in case you let go, perhaps it will twist and go over. It is advisable to add guide rails to produce the train car work correctly.5Cut your cardboard into two strips 4 inches longer than your shoe box resulting SmCo Magnets in 2 inches wide. Tape them in the box, the width on the train car. Place the train car inside guide rails. Push it backwards and forwards to be effective the maglev model train.